Philips 27TS54C - Manual (Page 6)

□I
A dding C hannels in M emory (M anually )
A uto Programming (see page 2
of the Quick Use Guide) adds
all the channels it can find (on
your Antenna or Cable TV system)
into the TV's memory. Add/Delete
Channels nudces it easy for you to
add other channels, or drop
unwanted channels, from the list of
channels in the TV's memory.
<i>
rrwm.
Press the MENU (M) button
on the remote, then press the
CHANNEL A or T buttons to
select the word CHANNEL with
the TV’s on-screen arrow.
Press the CHANNEL NUM­
BER buttons on the remote to
select the channel you want to
SAVE (or DELETE.)
Press the (+) button to SAVE
the selected channel number into
memory.
Press the (-) button to DELETE
a channel from memory.
<
3
>
Press the STATUS button to
clear the screen after adding all
the channels you want.
_ Try it out. Press the
iCHANNELAT buttons.
The channels you SAVED should
appear. The channels you
DELETED should not appear.
Remember, you can also add the
VCR/AUX mode (see page 11)
into the TV’s channel memory.
Then by pressing the CH
A ▼
buttons you can quickly select the
AudioA^ideo Input jacks on the
rear of the TV.
NOTE: You can also add the VCR/AUX mode into
the TV’s channel memory. Then you can quickly
select the Audio/Video Input jacks on the rear of the
TV by pressing the Channel AT buttons.
To “SAVE” the VCR/AUX mode into the TV’s
channel memory:
• With the on-screen menu displayed, press the CH
A or T button and select the INPUT control.
• Press the (+) or (-) button to place the TV in the
VCR/AUX mode.
• Press the CH A or T button to reselect the
CHANNEL control.
• Press the (+) button to “SAVE” VCR/AUX mode
into the TV’s channel scan memory.
• Press the STATUS button to clear the Menu from
the screen.
Try it out. Press the AT buttons to be sure the
VCR/AUX mode is present. (Should appear
between the highest and lowest broadcast channels
within your TV’s scan memory.)