Compaq SW3324 - Manual (Page 55)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-17
Compaq SW3322/SW3323/SW3324 Dual-Speed Switch User Guide
Writer: Fran Spragens Project: User Interface Comments:
File Name:3324_3.doc Last Saved On:3/16/99 3:05 PM
VLAN #n Configuration Menu
The VLAN #n Configuration Menu allows you to configure the VLAN Port Name
for a specific port, add or remove a port in the VLAN, and add or remove a VLAN
egress port. Select c from the VLAN Menu, enter a port number, and press Enter
to view the VLAN #n Configuration Menu. Figure 3-13 shows the VLAN #n
Configuration Menu and Table 3-12 describes the VLAN #n Configuration Menu.
NOTE: The designation “#n” represents the number of the specific VLAN to be configured.
Figure 3-13 VLAN Configuration #n Menu
Table 3-12
VLAN Configuration #n Menu Descriptions
Field Description
Ports in VLAN Lists the number of ports in the specific VLAN.
VLAN Egress Ports Lists the number of VLAN Egress Ports in the specific VLAN.
VLAN Name Allows you to enter an administrative name for the VLAN (1-14 character range;
entering a VLAN name is not required).
Add Port in VLAN Allows you to enter a port in the VLAN.
Remove Port in VLAN Allows you to remove a port in the VLAN.
Add VLAN Egress Port Allows you to add a VLAN Egress Port.
Remove VLAN Egress Port Allows you to remove a VLAN Egress Port.
NOTE: Once ports are configured as part of a custom VLAN, they will be moved to
that selected VLAN, and removed from their previous VLAN.
VLAN #n CONFIGURATION Access Control:
READ/WRITE
Ports in VLAN 1-26
VLAN Egress Ports None
a. VLAN Name default
b. Add Port in VLAN
c. Remove Port In VLAN
d. Add VLAN Egress Port
e. Remove VLAN Egress Port
x. Previous Menu
Enter Selection: