Compaq SW3324 - Manual (Page 95)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-4 Technical Specifications
Writer: Fran Spragens Project: Technical Specifications Comments:
File Name:3324_a99.doc Last Saved On:3/15/99 2:40 PM
10Base-T and 100Base-TX Ports
The switch provides IEEE 802.3u auto-negotiation on its 10Base-T/100Base-
TX ports for 10/100 speed and full/half duplex operation. Table A-2 shows the
10Base-T/100Base-TX pinouts. These ports are wired MDI-X. All undefined
pins are not used.
Table A-2
10Base-T/100Base-TX Pinouts
Pin MDI-X Signal Name
1 RD+
2 RD-
3 TD+
6 TD-
MDI/MDI-X Crossover Cable Wiring
Figure A-1 shows the wiring scheme for implementing a crossover cable if
needed for connection to the switch’s 10Base-T or 100Base-TX ports. Such a
cable may be required when connecting the switch to another switch or a hub
device.
Figure A-1 External Crossover Cable Wiring