Attach the rail to the header bracket – Craftsman 1/2 HP GARAGE DOOR OPENER MODEL 139.5364812 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Attach the Rail to the Header
Bracket
INSTALLATION STEP 3
Header Wall
Header
Bracket
Position the opener on the garage floor below the
header braoket. Use packing material as a
protective base. NOTE: If the door spring is in the
way you’ll need help. Have someone hold the
opener securely on a temporary support to allow
the rail to clear the spring.
Position the rail bracket against the header
bracket.
Align the bracket holes and join with a clevis pin
as shown.
Insert a ring fastener to secure.
Opener carton or
Temporary Support
HARDWARE SHOWN ACTUAL SIZE
o
Clevis Pin
5/16"x2-3/4"
O
Ring Fastener
14
Advertising