Tabletop/desktop installation – AT&T 950 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Battery installation
continued from page 1
3 . Close the battery compartment cover, making sure
the cover snaps into place.
Tabletop/desktop installation
For wall mount installation, see page 7 of user's manual part 2.
I .
Check the base wedge.
The set arrived with the base wedge positioned for desk use.
Make sure it is secure by pressing the two feet.
2 . Connect the long telephone line cord to the jack labeled TEL
on the back of the phone.
3 . Connect the other end of the line cord to a modular wall jack.
Advertising