When a clean cycle is finished, Incomplete settings – Sears 36519 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO SET SELF-CLEAN
CYCLE
Be sure oven door is closed.
The door locks automatically after the controls are set.
The self-clean cycle lasts 3-1/2 hours.
When the oven reaches locking temperature the word LOCK
will be shown in the ERC display.
You can push STOP TIME BUTTON to find out when the
cycle will end. Push CLEAN BUTTON to return to count
down.
WHEN A CLEAN CYCLE IS
FINISHED
After a clean cycle, the oven door cannot be opened unless
the word LOCK is off in the ERC display and the oven has
cooled. If you cannot open the door immediately after the
word LOCK goes off, wait about one minute and try again.
TO
INTERRUPT
A
CLEAN
CYCLE______________
(T) PUSH
CWJCEL
h z irt
t^ J iU
CLEAN LOCK U
SET
TIMER CLOCK
CLEAN
BROIL BAKE
Then follow instructions under WHEN A CLEAN CYCLE IS
FINISHED.
TO SET DELAY SELF-CLEAN
CYCLE
STOPTIMEmust be more than 3-1/2 hours laterthan current
time of day.
You can press and hold CLEAN button to find out when clean
cycle will start.
INCOMPLETE SETTINGS
Attention Tone will sound if CLEAN button is pushed and
SET knob is not turned.
Display will show "door" if the oven door is not fully closed.
Close the door and the cycle will resume.
20
CSCL03-3