Sears 270-3250 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. Replace the bolt on the carburetor.
8. Store the emptied gasoline in a suitable place.
^ CAUTION: Do not store fuel from one season to another.
^ CAUTION: Never pour gasoline down a drain or in a gutter. Call your local
authorities to dispose of gas properly.
Figure 22- Draining gas from the carburetor
Adjusting Drive and Auger Cables
TIMELINE: As needed.
Over time, the tension in the cables that lead to the drive control and auger control
handles may loosen. Ideally, the cables should be just barely taught when the handles
are in the released position. To tighten the handle cables, use a wrench or pliers and
gently rotate the metal turnbuckle at the top of the cable until the desired tension is
achieved (see figure 23).
Figure 23- Adjusting drive and auger cable tension
25