Humidity control, Manual dryout, Operating humidifier controis – Sears 758.144131 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
 
Operating Humidifier Controis-
The operating controls of your Kenmore 
Quiet Comfort Whole House humidifier are 
located on the top center of the humidifier.
The controls are found under the smoked 
control cover, located t>etween the air cir
culating fans.
Lift the control cover by placing your finger 
in the round cutout and lifting. The cover 
will stay open. Now you can clearly see the
control area. Familiarize yourself with the 
controls and reference the diagram of the 
control area for the correct naming used in 
this manual.
To Operate the Controls
Humidity Control:
Adjust the amount of humidity depending
on your needs. The humidifier will turn on
and off as required to maintain level of
humidity selected. A medium setting (half
way between MIN and MAX) is recom
mended, but there are times when a low or 
high amount of humidity may be preferred. 
For constant operation of humidifier. MAX 
allows for the maximum amount of humidi
ty to be evaporated into the air continuous
ly.
IMPORTANT: Water damage may result if 
condensation starts to form on windows or 
walls. Humidity Control setting should be 
lowered
until
condensation
no
longer
forms.
Speed Control
Your
Kenmore
humidifier
has
a
three
speed rotary fan control. The higher the air 
flow speed, the more water Is evaporated 
and released into the air. Low spe^ (1) is 
the quietest and is provided for conditions 
that may not require as high an evapora
tion rate.
Fill Light
When the unit has a small amourrt of water
left in it, the fill light will come on and the 
unit will automatically shut off.
• •
/“X*
t /
,
// •
• V7
/•
max
MIN •
3
2
/
1 ^
-—
y M
OFF
FILL
Manual Dryout
At the end of the humidification season or
if you do not plan to run the humidifier for 
one week or more, you can override the 
automatic 
shutoff
function
to
completely
dry the humidifier cabinet out.
To do this, simply slide the float retainer 
located at the back of the humidifier cabi
net to the top position of the slot It is locat
ed in. This will hold the float in an upward 
position and the fans will run until you turn 
the power off.
NOTE: Be sure to position float retainer to
the normal operating mode (lowest posi
tion in slot) for humidifier operation.
Below is a diagram of the slot the float 
retainer is located in at the back of the cab
inet.
n
u
.TOP POSmON IS FOR
MANUAL DRYOUT
.BOTTOM POSITION I&FOR
NORMAL OPERATION MODE