Important assembly update – Sears 831.28742 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
IMPORTANT ASSEMBLY UPDATE
Please replace assembly step 7 on page 5 of the user's manual artth the step
below.
7. Before using №e CARDIO FORCE, check №e Magnet (18) md the Reed Swtteh
(15). Pivot the Pedal Frame (7) until the Magnet is aligned with the Reed Switch
(see the inset drawing). Loosen the Indicated #8 x 3/4” Screw (27). Adjust the posi
tion of the Reed Switch so that there Is a 1/B" gap between the Magnet and die
Reed Switch. Retighten the Screw.
Make sure that all parts of the CARDIO FORCE are property tightened.
Part No. 127795 R1095A01995 Sears, Roebuck and Co.
Advertising