Canon SCANFRONT 220 - Manual (Page 36)

3-5
Chapter 3 ScanFront Setup
3.
Configuring the Scanner Settings
The scanner setup consists of configuring the initial network settings from the [Administrator setting] screen, and then configuring
the settings needed to use the scanner as described in
Chapter 4 “Web Menu (Administrator Mode)” .
❏ Administrator Settings
The following items are available for administrator settings. For details, see “Configuring Administrator Settings” on p. 3-8 .
Hint
Except for the scanner maintenance items (roller counter reset, touch panel adjustment, and initialization), the administrator setting items
can be configured from the Web Menu (Administrator Mode). For details,
see “Web Menu (Administrator Mode)” on p. 3-6 or Chapter 4 “Web
Menu (Administrator Mode)” .
Setting Item Description Administrator setting
Web Menu
(Administrator Mode)
Network settings
Set the Device Name and IP Address needed to
connect to the network.
Yes Yes
Change administrator
password Set the password required for logging in to
[Administrator setting] and the Web Menu.
Yes Yes
Backup / Restore all
settings
Back up or restore the scanner settings. Yes Yes
Login type setting Select the login screen for users. Yes Yes
Roller Counter Reset Reset the counter after replacing the feed roller. Yes No
Format ScanFront 220
Use to delete all of the current settings, such as
when changing the operating environment of the
scanner.
Yes No
Touch panel adjustment
Adjust the touch panel when it does not operate as
expected.
Yes No
Display language setting Set the language displayed on the touch panel. Yes Yes