Sears KENMORE 911.41369 - Manual (Page 20)

¡^smwMBiis mm
M
I
(kmFM0 Rmm(o.
imwrmm
SOCKET
iCfXoTo)'/
70 SEM0¥E.“
Open the door to the broil
stop position. Grasp the
door on each side and lift
up and off the hinges. B0
M07 LIFT ms m&E
BW THE HAWOIE.
m REU0WE THE €&¥Ems
la Disconnect electrical power to the oven at
the main circuit breaker or fuse box.
2u Hold your hand under cover and firmly
push back the bail wire, until it dears and
releases the bulb cover.
EEPl^CE THE LIGHT BULBs
Unscrew the light bulb and replace it with a
40-watt home appliance bulb.
T0 BEPLMCS €0¥EEs
la Place the bulb cover into the groove of the
bulb socket
2a Pull the bail wire forward until it snaps into
the indentation on top of the bulb cover.
3a Reconnect the electrical power to the oven.
Do noi touch a hot oven light
bulb. Do not touch a bulb with
wet hands or wet cloth.
Never touch the electrically
live collar on the bulb when
removing
or replacing the
bulb. Do noi remove any
screws.
When the door is removed
and the hinge arms are in
the broil stop position, do
not bump into the hinge
arms. They could snap
back and cause injury to
hands and damage the porcelain finish
of the front frame. Cover the hinge arms
with empty paper towel rolls or towels
while working in the oven area.
TO REPLACES
Remove the paper towel
rolls or towels. Make sure
the hinges are still in the
broil stop position. Grasp
the door on each side.
Lift the door over each
hinge. Line the slots at
the bottom of the door
with the hinges. Slide the
door
down over the
hinges as far as it will go.
2@