Sears 831.2974 - Manual (Page 5)

ASSEMBLY
The treadmill is delivered in the compact stowaway position. Set the treadmill in a cleared area and
remove all packing materials. Do not dispose of the packing materials until assembly is completed.
TOOLS REQUIRED FOR ASSEMBLY: An 8” adjustable wrench (not Included).
1. To convert the treadmill to the operating position, first
raise the Right Handrail (20) and the Left Handrail (not
shown) to a vertical position. Align the hole in the lower
end of the Right Handrail with the hole in the side of the
Frame (45). Insert a Handrail Bolt (34), with a Handrail
Washer (36), into the Right Handrail and tighten the Bolt
into the Frame. Tighten the Handrail Bolt that is already
in the Right Handrail and the Frame.
Be careful not to
pinch the wires in the Right Handrail. Attach the Left
Handrail in the same manner.
Remove the paper backing from the Wrench Clip (59).
Press the Wrench Clip onto the Right Endcap (55) in the
indicated location. Press the Allen Wrench (58) into the
Wrench Clip.
Slide the metal Clothes Clip (4) onto the Pulse Earclip (5)
in the indicated location. The use of the Pulse Earclip is
explained in the MOTIVATIONAL FITNESS MONITOR
section on page 8.
Make sure that all parts are tightened before using the treadmill.