Permanent press and synthetics – Amana RAYTHEON LE2502 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For the most even drying, fabrics in a load should be of similar weight. If mixed
loads are dried, remove the lighter weight fabrics when they are dry. Avoid
overdrying to prevent harshness of fabrics, wrinkling and possible shrinkage.
Remove cotton sheets slightly damp, fold and smooth by hand for less wrinkling.
*Treated clothes are those items that will be labeled "FLAME RETARDANT,"
SCOTCFtGUARD™, etc. Follow the care labels on these garments for proper
washing and drying.
PERMANENT PRESS AND SYNTHETICS
These loads will require the following special treatment to get the best results
from their "no-iron" properties.
• Static electricity may cause garments of synthetic fibers (as in lingerie) to cling
together especially if they are overdried. The use of a liquid fabric softener in
the rinse water of the washer will soften clothes and reduce static electricity.
• Do not wash or dry clothes that shed lint in the same load with permanent
press or knit garments.
• Remove permanent press load immediately after dryer stops. If the permanent
press load is wrinkled, add a damp towel and operate the dryer for an
additional 10 minutes with heat and cool-down, remove load immediately.
-
15
-