Acer lcd monitor quick start guide (qsg), Important safety instructions, Package contents – Acer B196WL User Manual
Page 2: Attaching the monitor to the base, Connecting your monitor to a computer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1.
To dean the LCD monitor screen:
•
Turn off the LCD monitor and unplug the power cord.
•
Spray a non-solvent cleaning solution onto a rag and dean the screen gently.
2.
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5.
Store the LCD monitor in a room with a temperature of -20” to 60” C (-4” to140” F). Storing the LCD monitor
outside this range may result in permanent damage.
6.
Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
•
Monitor-to-PC signal cable is frayed or damaged.
•
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
•
The LCD monitor or case is damaged.
Package contents
LCD
monitor
Power cord
Audio
cable
(optional)
VGA cable
(optional)
DVI cable
(optional)
Quick start
guide
m
Attaching the monitor to the base
1.
Remove the monitor from the packaging.
2.
Attach the footstand to the base, (for selected models)
3.
Turn clockwise to lock. Ensure that the base in locked onto the stand, (for selected models)
4.
Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin, (for selected
models)
Connecting your monitor to a computer
1.
Turn off your computer and unplug your computer's power
cord.
2. Connect the signal cable to the VGA and/or DVI-D (optional)
input socket of the monitor, and the VGA and/or DVI-D
(optional) output socket of the graphics card on the
computer. Then tighten the thumbscrews on the signal
cable connector.
3.
Optional: Connect the audio input socket (AUDIO IN) of the
LCD monitor and the line-out port on the computer with
the audio cable.
4.
Insert the monitor power cable into the power port at the
back of the monitor.
5.
Plug the power cords of your computer and your monitor
into a nearby electrical outlet.
rr