External controls, Regulations and safety notices fcc notices – Acer B196WL User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

External controls

1&2 (!)

Power button Turns the monitor on/off. Blue indicates power on. Amber indicates

standby/ power saving mode.

3&4 </>

Minus/Plus

If the OSD is active, press the Minus or Plus buttons to toggle between

the OSD options. If the OSD is inactive, press the Minus or Plus buttons to

adjust the volume. (Optional)

5

Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.

6

Auto

Auto

If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive,

press Auto and the monitor will automatically optimize the display
position, focus, and clock of your display.

7

e

Empowering
Key

a. When the OSD menu is active, this button will act as the exit key (exit

OSD menu).

b. When the OSD menu is inactive, press this button to select scenario

mode.

Regulations and safety notices
FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This device generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this device does cause harmful interference to radio

or television reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the device and receiver.

Connect the device into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements

and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and

RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for

the setting of ecodesign requirements for energy-related product.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain

compliance with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B

limits may be attached to this equipment. Operation with non-certified peripherals is likely to result

in interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user

authority, which is granted by the Federal Communications Commission, to operate this product.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Notice: Canadian users

CAN ICES-3(B)/NMB-3(B)

Advertising