AT&T AT&T 7650 - Manual (Page 5)

T E L E P H O N E O P E R A T I O N
Making a Call
1 Press :PHONE', and wait for the
PHONE light to go on.
2 Vv lien you hear a dial toue. uiai liic
number. "
NOTE: You might experience a slight
delay before you hear a dial tone, as the
AutoSelect® feature searches fora clear
channel.
Answering a Call
If the handset is in the base, lift
the handset. The PHONE light goes
on, and the call is connected.
If the handset is away from the
base, press
¡ phone . The PHONE
light goes on, and the call is
connected.
Ending a Call
If you are near the base, place the
handset in the base.
If you are away from the base,
press 'OFF .
Redial
The last number dialed on this phone is
stored in redial memory until you dial
another number.
1 Press iPHONEi. and wait for the
PHONE light to go on.
2 When you hear a dial tone, press
\REDIAU..
Special Telephone Services
If you subscribe to special local
telephone company services like Call
Waiting or Call Forwarding, you can
access them by pressing
. phone , whenever
you would press the switchhook on a
regular phone.—This is like the Flash
button on some other phones.
Temporary Tone
If you have dial pulse (rotary) ser\'ice,
this feature allows you to enter codes or
tones needed to operate answering
machines, or use electronic banking
services, calling cards, and other special
services. This feature will operate most
special services; however, some serv'ices
may actually require a touch tone line.
To be sure, ask the company that
provides the special service.
1 Dial the call, then press ioiTeT.
Any buttons pressed after this send
tone signals.
2 After you hang up, the phone
automatically returns to dial pulse
(rotary) dialing.
NOTE: If you have touch tone sen’ice.
you do not need to use the Temporary
Tone feature.
Page
The Page feature allows you to signal
someone at the handset from the base.
• Press '.PAGEJFiW'. on the base. A 3-part
paging tone will sound at the
handset.
Find
This feature is useful if you misplace the
handset.
To locate the handset using this
feature:
Press and hold
pagejfind . on the base for
approximately three seconds. A
repeating paging tone is sounded in the
handset.
To cancel the Find feature, press W
on the handset or iPAGEF^m on the base.
NOTE: The Find feature will turn itself
off in approximately 3 minutes if you
haven't turned it off before then.
End a call:
PHONE light goes on
while you are on a calL
Answer calls and access
special subscriber calling
services requiring
switchhook flash.
Redial last call made.
Temporary Tone