Pentax ZX-5N User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. As shown in the illustration, pull the film leader out
only far enough to reach the take - up spool.
THE
SHUTTER
CURTAINS
ARE
FINE-PRECISION
MATERIAL.
DO
NOT
TOUCH
THEM
WITH
YOUR
FINGERS OR ANY OTHER OBJECT WHILE LOADING
FILM.
4. Align the film leader with the film leader end mark
O as shown.
• Make sure that the film perforations properly engage
on the sprocket teeth
• Make sure that the film leader is positioned under the
film retainer 0 as shown in the illustration.
OD
>
o
o
■o
m
3
)
>
H
o
z
3
m
■D
>
39
>
o
z
If you have pulled out too much film, push it back Into
the cartridge to reduce the slack.
The DX information pins in the film chamber are used
to read film speed. Keep them clean and free from
scratches.
To
remove
smudges,
wipe
them
gently
with a soft, dry cloth.