7) switching the metering mode, Using the spot metering mode, How to use – Pentax ZX-5N User Manual
Page 72: Set the metering mode switch to the [ce] position, Switching the metering mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(7) SWITCHING THE METERING MODE
o
z
cn
Using the Spot Metering Mode
The Spot Metering Mode measures light only in the
small area in the center of the viewfinder. When shoot
ing in this metering mode, place the subject you want to
meter within the AF spot frame [C 3] in the center of
the viewfinder.
2. Measure the small area in the center of the view
finder as illustrated.
• If the brightness range between areas in the photo
graph is too great, the exposure should be determined
in consideration of the overall brightness. Otherwise,
the picture will come out improperly exposed.
How to use
1. Set the metering mode switch to the [CE] position.