Canon 40D - Manual (Page 139)

139
wPrinting
5
Set the date and file number
imprinting.
Set as necessary.
Turn the <5> dial to select <
I
>,
then press <0>.
Turn the <5> dial to select the
desired setting, then press <0>.
6
Set the number of copies.
Set as necessary.
Turn the <5> dial to select <
R
>,
then press <0>.
Turn the <5> dial to select the
number of copies, then press <0>.
7
Start printing.
Turn the <5> dial to select [Print],
then press <0>.
X The <l> button’s blue lamp will
blink and the printing will start.
To print another image with the same settings, select the image and just
press the <l> button lit in blue. Trimming will not be applied to 1-copy
printing.
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
If you did “Adjusting the rotation angle” (p.141), the printing time may
take longer.
To stop the printing, press <0> while [Stop] is displayed, then select
[OK].