Cisco OL-12997-01 - Manual (Page 7)

B-7
Cisco IPICS Server Administration Guide
OL-12997-01
Chapter B Setting Up and Using a Cisco Unified IP Phone as a Cisco IPICS Push-to-Talk Device
Using the Cisco IPICS Service on a Cisco Unified IP Phone
Using the Cisco IPICS Service on a
Cisco Unified IP Phone
This section describes how to use the Cisco IPICS service from a Cisco Unified IP
Phone. Before a user can access the Cisco IPICS service from a
Cisco Unified IP Phone, the prerequisites that are described in
Table 0-1 must be
met:
In addition, users should be aware of the following guidelines:
• To obtain help with using the Cisco IPICS service on a Cisco Unified IP
Phone, press the Help softkey.
Table 0-1 Prerequisites for Using the Cisco IPICS Service
Prerequisite Reference
Cisco IPICS service must be
configured. See the “Configuring Cisco IPICS as a
Phone Service for Cisco Unified
Communications Manager” section on
page B-2
or the “Configuring
Cisco IPICS as a Phone Service for
Cisco Unified Communications
Manager Express” section on
page B-4
.
Login credentials must be configured
for the user. A Cisco IPICS user can configure
personal login credentials as described
in the
“Managing Your User Profile”
section on page 5-2 .
A Cisco IPICS operator can configure
login credentials for a user as
described in the
“Managing Dial Login
Information for a User” section on
page 3-13
.
Users in a Cisco Unified
Communications Manager
environment must subscribe to the
Cisco IPICS service. See the “Subscribing to the Cisco
IPICS Service” section on page B-5 .