Adding more ice and removing water – Maytag MSA240HC User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adding More Ice And
Removing Water
Ice will need to be edded as addilbnal beverages are
chilled. The Add Ice Indicator Light in from of the unit Is III
when the ice/water bath is above
To add more ice.
follow the steps below;
1. Remove waler unlll il i$ even with Ihe Minimum Fill Llne.
To remove water, select the CAN+ NO SPIN setting. Place a
cup under the Water Exit Jet and press the START^STOP
button. When ihe cup is full, press the START/STOP button
again and discard the water. Continue
I
his process to
remove more water until It is at the Minimum Fill Line.
2- Add a minimum of one tray Of ico lo the Ice and Water
Bin and make sure ice is not trapped between the roller and
side rib or above the drive roller.
The Add Ice Indicator Light will not turn off
until you begin chilling your next beverage.