Maytag MAV5057 - Manual (Page 5)

Step Select Water Temperature
Press the appropriate button to select the
wash and rinse temperatures. Follow the
garment care label for best results. Use
the chart at the right as a guide.
REMEMBER: In wash water temperatures
below 65" E, detergents do not dissolve well
Or clean well. Care labek define coU water
as up to 85“ F.
LOAD TYPE
White and heavily soiled,
color*fast items
Delicate or colorfast items
Moderately soiled,
colored items; most wrinkle
free items
Brightly colored, lightly soiled
items; washable woolens
WASH/RINSE TEMP
HOT
COLD
WARM
WARM
WARM
COLD
COLD
COLD
Step
o
Select A Custom Cycle (if desired)
Press the appropriate button to select the custom cycle desired.
CYCLE USE
Super
Wash
Can be used with any wash cycle to clean very heavily
soiled items. Provides fast agitation throughout the
WHITES and COLORS cycles. Provides fast agitation
for approximately 3 minutes at the beginning of the
DELICATES cycle.
Normal Wash
(select models)
Used for most loads of laundry. See previous page for
cycle descriptions.*
Second Rinse
(select models)
Provides an additional rinse at the end of the cycle to
more completely remove laundry additives, suds, per­
fume, etc.
Cancel
(select models)
Press this button to cancel and reset any of the above
options.
* Normal settings on all cycles will change agitation speeds during the
wash time. This is normal.
Step
0
Start Washer
• Add detergent.
• Add load and close lid.
• Pull the control dial out to start.
CUSTOMIZE CYCLE
SUPER
WASH
NORMAL
WASH
OR
CUSTOMIZE CYCLE
SUPER
WASH
SECOND
RINSE
CANCEL