Washing, Presoaking – Maytag LAT8714 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

to the proper cycle and wash time.

Washing:

The HEAVY cycle is designed to wash very soiled
loads, the NORMAL cycle is for average soiled
loads and the LIGHT cycle should be selected for

slightly soiled loads.

For REGULAR FABRIC loads, turn the control knob
to 12 minutes for a HEAVY cycle; to 8 minutes for

a NORAAAL cycle; and to 5 minutes for a LIGHT
cycle.

The SUPERWASH cycle (not on all models)
provides additional wash time for regular fabric
loads. It will add approximately 6-8 minutes of

agitation to the cycle. To select, turn the control
knob to SUPERWASH.

For PERMANENT PRESS loads, turn the control

knob to 10 minutes for a HEAVY cycle; to 7
minutes for a NORMAL cycle; and to 5 minutes

for a LIGHT cycle. Due to the extra cool down

rinse which minimizes wrinkling, this cycle can

also be used for non-permanent press items when
additional rinsing is needed.

For DEUCATES, washable woolens or "hand-

washable" items, turn the control knob to 8
minutes for a NORMAL cycle; and to

5

minutes

for a LIGHT cycle.

The QUICK CYCLE reduces the cycle time by using
a 6 minute wash and a shorter first spin and
rinse. Total cycle time is approximately 16
minutes plus fill times. To select, turn the control

to assure proper agitaHon and spinning

for each load type. REGULAR FABRIC
cycles and the QUICK CYCLE will provide

a fast wash/spin speed. PERA4ANENT

PRESS will have a fast wash/spin speed

along with a cool-down rinse. DEUCATE

<ycles will have a gentle wash and slow
final spin speed.

Presoaking:

The AUTOMATIC PRESOAK cycle (not on all

models) moves from the presoak into the

HEAVY' regular fabrics cycle automatically.

Since the presoak and the wash are done in one

tub of water, it saves water and energy. A hot

water presoak is recommended for heavily soiled

items. A warm or cold water presoak is

recommended for protein stains (blood, grass,
etc.).

'

To use the AUTOMATIC PRESOAK cycle turn the

control knob to PRESOAK. The washer will soak
for approximately 10 minutes (this includes
periods of agitation) then move directly into 12
minutes of wash without draining and refilling.

When using the Presoak cycle, use up to 50%
more than the usual amount of detergent or use a
presoak product such as Axion or Biz* in

addition to the regular amount of detergent. If

you choose to use bleach, it can also be added
at this time.

Brand names are the trademarks of the respective manufacturers.

... more

PAGE 5

Advertising
This manual is related to the following products: