Maytag CWG3600 - Manual (Page 7)

ELECTRONIC CLOCK AND OVEN CONTROL
/_/ У " /J U
U I h i
1 1 1
SROiL ШСК
DELAY TIÎJfEO BAIŒ
STOP TIMEñ !ш|
The electronic clock and oven control on your
Maytag wall oven is used for the time-of-day
dock, timer, bake, broU, and programmed
operation functions. A beep sound each
time a function pad is pressed.
The display on the control will flash when
power is first supplied to the wall oven or if
there Is a power failure. Once the time-of-day
clock has been set (see Setting the Clock, page
6), the display wlU stop flashing.
The oven will automatically turn off if it is
left on for 12 hours.
NOTTE: The electronic control is equipped i -
With a self-dia^ostlc feature for service use
ONLY. If a fault code (F plus a number, exL '
FI) appears In the display along with a
continuous beeping sound, press the
CANCEL pad: See page 20 if the fault code
reappears in the display.
Explanation of Function Pads
The following pads are found on your Maytag
electronic clock and oven control:
Cancel Pad ;
Press this pad to cancel all o[>eratloils except
the time-of-day clock and timer. If yjsu are ever
unsure if you've programmed the coptrol
correctly, press the CANCEL pad and start over,
A and ▼ Pads
. ' ' - h - ' r
S|
Press or press and hold these pads to' ehfer the
time or temperature desired. These pads are
also used to select Hi or Lo brod. : :
Timer Pad
The timer can be set from 1 minute to 9 hours,
50 minutes. It will covmt down by seconds
(when set for
1 minute) or minutes (when set
for 2 minutes or more time). See page 6 for
instructions on setting the timer.
Clock Pad
Use this pad to set the time-of-day clock. For
instructions, see page
6.
You may also press thi.s pad to recall the
current time of day. For example, if the timer is
counting down hi the display, press the CLOCK
pad to return the current time to the display.
The timer will continue to count down and a
signal will sound when the time expires.
Cook Time / Oven Stop Pads
These pads are used to program the oven to
start and stop automatlcahy. either
Immediately or at a later time. For detailed
Information on using Programmed Oven
Operations, see pages 14 to 15.
Broil Pad
Use this pad to select broil. Two heat selections
are available for broilmg - HI and Lo. See page
13 for more broiling information.
Oven Temp Pad
This pad is used to select the oven temperature.
The oven temperature Is set by pressing this
pad and the A or Y pad. Additional baking and
roasting Information can be found on pages 7
to
12.
PAGES