Clock and timer, To set the time-of-day clock, To set the timer – Maytag X9112VUV User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLOCK AND TIMER
The display will flash when the wall oven is first connected to power or if power is
interrupted. The display will stop flashing once the time-of-day clock has been set.
To set the time-of-day clock:
1. Press the CLOCK pad.
2. Press and hold the HOUR pad to set the correct hours.
To change the time by a single hour, give the pad a short
tap.
3. Press and hold the MINUTE pad to set the correct
minutes. To change the time by a single minute, give the
pad a short tap.
For example: To set the clock for 3:15, press and hold the
HOUR pad until 3 appears in the hours display. Then press
and hold the MINUTE pad until 15 appears in the minutes
display.
To set the timer:
1. Press the TIMER pad. 0:59 {or one hour) will appear in
the display.
The timer will automatically begin counting down in
increments of one minute.
2. To set the timer for less than one hour, press the TIMER
pad then press and hold the MINUTE pad until the
desired time appears in the display. To change the time
by a single minute, give the pad a short tap.
3. To setthe timer for more than one hour, press theTIMER
pad then -
• Press the HOUR pad, 1:59 (or two hours) will
appear in the display.
• Press the MINUTE pad until the desired minutes
appear in the display.
NOTE: Two hours is the maximum time that can be set.
4. When the time has elapsed, 0:00 will appear in the
display and continuous beeps will sound indicating the
timer has counted down.
5. Press the CLOCK pad to cancel the beeps. The current
time of day will reappear in the display.
To cancel the timer:
Press the CLOCK pad and the display
will return to the current time of day.