Vermont Casting 6100 - Manual (Page 13)

14
Assembly Step 4 - Attach the Side Tables
1.
2.
3.
NOTE: For grill models equipped
with a side burner, only the right side
table will be installed. Refer to the
instructions on the following pages
for side burner installation. Retain 4
nuts and 4 bolts from hardware bag
C to be used for the side burner.
USE HARDWARE BAG C :
1/4-20 x 3/4”
bolt (8)
1/4-20 hex
nut (8)
LOCATE THESE PARTS:
7/16”
wrench
Tools Needed:
3/8”
wrench
side table (2)
Insert the 3/4” bolts
through the holes in
the support brackets
of the side table.
Attach the side table
to the four holes
located in the side of
the grill bottom using
the locking hex nuts
provided.
Attach the opposite
side table the same
way.