Vermont Casting 6100 - Manual (Page 17)

1
8
Assembly Step 5 - Assemble the Grill Lid
1.
2.
Position the back of the lid so that the rear
holes are in line with the hinge struts on the
back of the grill bottom.
Gently set the grill lid onto the grill bottom.
USE HARDWARE BAG D :
flat-head
screwdriver
standoff
gasket (2)
1/4-20 x 5/8”
bolt (4) hairpin (2)
1/4-20 hex
nut (4)
LOCATE THESE PARTS:
1/4” x 1-1/8”
hinge pin (2)
7/16”
wrench
Tools Needed:
grill
lid (1)
handle
standoff (2)
handle (1)