Conair Hopper Temperature Controller UGD031 User Manual

Page 15

Advertising
background image

D e s c r i p t i o n l

2 - 3

2

Description

Ty p i c a l A p p l i c a t i o n s

Carousel Plus “W” Dryer

The HTC process air heater is designed for use with a dehumidifying device
that supplies dry air, such as a central dehumidifying dryer in which the process
heaters (if present) have been disabled, or with a stand alone blower for hot air
drying.

The HTC can be used successfully in applications that require:

•

Drying temperatures up to 350°F (176.7°C) (250°F [121.1°C] on HAD
models).

•

The ability to dry multiple materials requiring different drying temperature
setpoints in a central drying system. (Requires separate HTCs / hoppers.)

•

The ability to easily take a hopper “off-line” for cleaning without shutting
down the entire central drying system.

Hot Air Dryer (HAD)

The HTC process air heater, for use with a hot air dryer such as a Conair model
HAD, connects plant air motivated by a Conair blower assembly to a material dry-
ing hopper.

The HTC for HAD can be used successfully in applications that require:

•

Drying temperatures up to 250°F (121.1°C).

•

Non-hygroscopic materials that are in pellet or flake form (not powder).

•

Open loop drying (not recirculated).

The HTC does not have an integral blower to circulate the hot air, so it can not be
used as a stand-alone material preheater. It must be combined with a Conair
Carousel Plus Series “W” dryer or HAD.

Advertising
This manual is related to the following products: