Brake / neutral pedal, Speed control, Power steering – Troy-Bilt GTX 20 User Manual
Page 18: Auxiliary hydraulic connections (model gtx 20), Warning, Brake/neutral pedal, Auxiliary hydraulic connections, Operation (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation (continued)
Brake / Neutral Pedal
Press brake/neutral pedal (Fig. 6-1) to
apply brake and when starting engine. To
lock brake (when parked), press pedal and
lift parking brake lever to lock pedal down.
Speed Control
Speed control allows operator to maintain
a constant drive speed without contacting
travel pedal. When activated, speed
control sets travel pedal to desired
position.
To set: When tractor is moving at desired
speed, press "RESET' to activate speed
control (Fig. 6-1). This sets travel pedal.
To stop: Press brake pedal or turn speed
control switch oft.
To reset: To re-activate speed control,
press reset.
Power Steering
Power steering is controlled by hydraulic
system. No adjustment is necessary.
Auxiliary Hydraulic Connections
(Model GTX 20)
Connections for auxiliary hydraulics are on
front, right-side of frame.
To use, clean all dirt and debris from
around connections. Push lock collar (Fig.
6-3) back. Remove rubber plugs. Insert
hydraulic hose end.
When auxiliary connections are not in use,
keep rubber caps in place to prevent
debris from entering hydraulic system.
KEEP HYDRAULIC CONNECTIONS CLEAN.
Dirty hydraulic connections can
contaminate hydraulic fluid and damage
hydraulic components.
A
WARNING
DIRTY HYDRAULIC CONNECTIONS CAN
CONTAMINATE THE HYDRAULIC FLUID
AND DAMAGE HYDRAULIC
COMPONENTS. KEEP RUBBER
PLUGS IN PLACE.
WARNING
HIGH PRESSURE HYDRAULIC OIL LEAKS
COULD PENETRATE SKIN. NEVER FEEL
FOR LEAKS.
18