Rules of operation, Speed ranges, Walk around inspection – Ariens SNO-THRO 008-SS322E User Manual
Page 9: Clearances, Clear area, Tip over, Safe distances, Thrown objects, Discharge area
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r
c
O
perational
S
afety
Rules of Operation
KNOW Unit before starting engine.
Understand;
• How to operate all controls
• Functions of all controls
• How to STOP in an Emergency
• Braking & steering characteristics
• Turning radius and clearances
Speed Ranges
DO NOT clear snow at too fast a rate.
DO NOT change engine governor
setting or over speed engine.
Walk Around Inspection
Complete a walk around inspection of
unit and work area to understand:
• Area of operation
• Your unit
• All safety decals
Visual Obstruction
Dust, smoke, fog, etc. can reduce
OL1021
A
vision and cause an accident. Operate
equipment only with good visibility and
OL0340
light.
n
Child Safety
Keep children out of work area and
under watchful care of an adult.
Hazardous Slopes
DO NOT attempt to operate on steep
slopes.
Use Extreme caution on slopes.
Unit Roll-Away
DO NOT park unit on an incline and
leave unit unattended.
Clearances
ALWAYS check overhead and side
clearances carefully before operation.
Clearly mark potential obstructions
before seasonal changes.
ALWAYS be aware of traffic when
operating along streets or curbs. Set up
safety signs and/or flags.
Clear Area
Keep area of operation clear of all toys,
pets, doormats, wire and debris to
avoid thrown objects which may result
in injury.
Work Area
ALWAYS be sure of your footing. Avoid
slippery surfaces. Walk; NEVER run.
Tip Over
DO NOT operate near drop offs,
ditches or embankments. Unit can
suddenly turn over if a wheel is over
the edge of a cliff or ditch, or if an edge
caves in. Avoid uneven and rough
terrain.
Safe Distances
Keep people away from unit during
operation.
Thrown Objects
Deflected materials can cause injury
and property damage. DO NOT
discharge directly onto paved or gravel
surfaces.
Discharge Area
ALWAYS stand clear of discharge area
during operation.
ALWAYS position Discharge Chute and
Deflector in safe direction and angle
before starting engine. ALWAYS
provide a safe, secure area for material
being discharged.
Ariens® Sno-Thro® Orig. 4/96