NordicTrack NTC59020 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT Jack is
being used, see instruction B. If you have a TV
with a built'in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 16.
HOW TO CONNECT YOUR VCR
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable Into the adapter. Plug the adapter into an
RCA Y-adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the AUDIO OUT jack on your VCR and plug the
wire into the unused side of the Y-adapter. Plug the
Y-adapter into the AUDIO OUT jack on your VCR.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable Into the adapter. Plug the adapter into the
AUDIO OUT jack on your VCR.
17