MTD 248-650-000 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION OF HOPPER AND UPPER GUIIDE
EXTENSION
1
.
2
.
Lower Leaf
Ramp Section
The lower leaf ramp section on the shredder is
placed in an upright position for shipping
purposes. Lower this section.
Place the hopper in position on the shredder.
See figure 3. Start all four hex washer head self
tapping screws (C), then tighten securely using
a 1/2" socket wrench.
FIGURE 3.
3.
Assemble the keepers (D) to the sides of the unit
with two hex washer head self-tapping screws (C),
using a 1/2" socket wrench. Tighten securely.
I
4.
Place upper leaf ramp section inside the lower leaf
ramp section. Secure with four hex bolts (A) and
hex lock nuts (B). Tighten securely. See figure 5.