C. adding water and ground coffee – Mr. Coffee 115949 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2. Rinse the water filter in fresh

water before first use.

3. Follow "Addins Water and Coffee"

instructions

4. When you are done brewing your

coffee, rinse the water filter with
fresh water. Do not put your water
filter in the dishwasher.

To replace the water filter disks: twist the
gray disk cover from your water filtration system.

Remove the used disk. Insert the new disk into

the frame and twist the cover back into place.

C. Adding Water and Ground Coffee

1. Lift and open the filter basket lid. For your

convenience, you can lift out the removable
filter basket.

2. Place a MR. COFFEE® brand 10-12 cup

paper basket-style filter or a MR. COFFEE®
permanent filter into the removable

filter basket (Figure 5).

NOTE: If using paper filters, it is important

that the sides of the filter fit flush against
the side of the filter basket. If filter collapse

occurs, dampen the filter before placing

in the filter basket and adding ground

coffee and water.

4. Add the desired amount of coffee

and gently shake to level the coffee.
See the Suggested Coffee Measurement
Chart.

3. After following instructions in the

'Water Filtration System" section, place

the MR. COFFEE® water filter in the filter

basket, making sure that the side marked

“this side up" faces you and that the

water filter is level.

5. Be sure the filter is properly centered and

all the way down in the outer filter basket.
Close the lid.

F

igure

5

Advertising