NordicTrack NTEL07808.1 - Manual (Page 17)

1. Begin pedaling or press any button on the
console to turn on the console.
A moment after you begin pedaling or press a but­
ton, a tone will sound, and the display will light.
2. Select a trainer workout.
To select a trainer
workout, press the
Warm Up, Aerobic,
Endurance, or
Performance button
repeatedly until the
name of the
desired workout
appears in the dis­
play. The workout
time and a profile of
the resistance levels for the workout will also
appear in the display.
3. Begin pedaling to start the workout.
Each workout is divided into 20, 30 or 45 one-
minute segments. One resistance level is
programmed for each segment. Note: The same
resistance level may be programmed for consecu­
tive segments.
The resistance level for the first segment will
appear in the display for a few seconds. During
the workout, the workout profile will show your
progress (see the drawing above). The flashing
segment of the profile represents the current seg­
HOW TO USE A TRAINER WORKOUT ment of the workout. The height of the flashing
segment indicates the resistance level for the cur­
rent segment. At the end of each segment of the
workout, a series of tones will sound and the next
segment of the profile will begin to flash. If a differ­
ent resistance level is programmed for the next
segment, the resistance level will appear in the
display for a few seconds to alert you. The resis­
tance of the pedals will then change.
If the resistance level for the current segment is
too high or too low, you can manually override the
setting by pressing the Silent Magnetic Resistance
buttons. IMPORTANT: When the current seg­
ment of the workout ends, the pedals will
automatically adjust to the resistance levei
programmed for the next segment.
The workout will continue in this way until the last
segment ends. To stop the workout at any time,
stop pedaling. A tone will sound and the time will
stop counting. To restart the workout, simply
resume pedaling.
4. Foiiow your progress with the dispiay.
See step 4 on page 15.
5. Measure your heart rate if desired.
See step 5 on page 16.
6. When you are finished exercising, the consoie
will turn off automaticaiiy.
See step 6 on page 16.
17