NordicTrack NTEL07808.1 - Manual (Page 20)

HOW TO CHANGE CONSOLE SETTINGS 3. Select a unit of measurement if desired.
The console features a user mode that allows you to
select a unit of measurement and a backlight option
for the console and to view console usage Information.
1. Seiect the user mode.
To select the user mode, press and hold down the
Priority Display button for a few seconds until the
user mode Information appears In the display.
2 Seiect a backiight option if desired.
The console has
three backlight
options. The ON
option keeps the
backlight on while
the console Is on.
The AUTO option
keeps the backlight
on only while you
are pedaling. The
OFF option turns the backlight oft.
The console can show pedaling speed and dis­
tance In either miles or kilometers.
The lower right display will show the selected unit
of measurement. An E for English miles or an M
for metric kilometers will appear In the lower right
display. To change the unit of measurement, press
the Silent Magnetic Resistance decrease button
repeatedly.
Note: When you replace the batteries. It may be
necessary to reselect the unit of measurement.
4. View consoie usage information if desired.
The lower left display will show the total number of
hours that the console has been used since the
elliptical exerciser was purchased.
5. Exit the user mode.
Press the Priority Display button to save the con­
sole settings and exit the user mode.
The upper display will show the currently selected
backlight option. Press the Silent Magnetic
Resistance Increase button repeatedly to select
the desired backlight option.
20