NordicTrack 831.29881 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Locate the two tabs on the Reading Rack (12). Slide the
tabs up into the two slots in the front of the Console (78).
Attach the Reading Rack to the Console with six Screws
(43).
4. Remove the two indicated Screws (43) from the left Upright
(70).
Attach the Storage Latch (5) and the two Latch Spacers
(93) to the left Upright (70) with the two Screws (43). Be
careful not to overtighten the Screws.
Note: If it Is difficult to fold or lower the treadmili,
remove one or both of the Latch Spacers (93).
5. Remove the backing from the Wrench Clip (88). Press the
Wrench Clip onto the lower end of the Upright (70) in the
indicated location. Press the Alien Wrench (87) into the
Wrench Clip.
6. Make sure that all parts of the treadmill are properly tightened. Place a mat beneath the treadmill to
protect the floor or carpet.