Start engine, Figure 10 – MTD 241-645A User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The ram should take approximately 30 seconds to
make a complete cycle. This speed may vary
depending on throttle setting and temperature of oil.
^ START ENGINE
1
. Place throttle control lever (on beam) in run
position. See figure 8.
2. Move choke lever to CHOKE position. See
figure 9.
THROTTLE CONTROL
/-C443URE 8
Open the breather valve. Valve must be open when
running log splitter. Valve must be closed when
transporting log splitter. See figure 10.
VALVE IN OPEN
POSITION
VALVE IN CLOSED
POSITION
BREATHER PLUG AND VALVE.
NOTE: Valve has left hand threads.
Clockwise to close.
FIGURE 10
4.
Rewind starter _ place one foot on wheel and
with a quick full arm stroke, keep firm grip on
handle and return rope slowly. See figure 11.
FIGURES
FIGURE 11