Assembly – Poulan 166120 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY
'CHEC KLM
BfP'ORE
'
fOU OPFRATE
AND ENJOY YC
)UR
NE
■W
TRACTOR,
WE WISH
TOA,
SSURE THAT YOU
RECEñ
Æ
THEBESTi OERFORMANCt
it
!> f\
II F
At / '
ONFRC
M
THIS
QUAI
> 1
1
FF,<
//' *■ H !
PLE \t E PEVlt W iHF tail OW'N
l
CHEC^USP
/
All assembly instructions have been completed.
✓ No remaining loose parts in carton.
/ Battery is properly prepared and charged. (Minimum
1 hour at 6 amps).
/ Seat is adjusted comfortably and tightened securely.
/ All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
/ Be sure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling).
/ Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
/ Check wiring. See that all connections are still secure
and wires are properly clamped.
WHILE LEARNING HO W TO USE YOUR TRACTOR, PA Y
EXTRA A TTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
/ Engine oil is at proper level.
/ Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
/ Become familiar with all controls - their location and
function. Operate them before you start the engine.
/ Be sure brake system is in safe operating condition.