Safety decals, Hi ih, Warning – Troy-Bilt REAR-TINE TILLER 675B User Manual
Page 5: Yourunitm^notlwe^oftiesymtx^s
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Safety Decals
For your safety and the safety of others,
various safety and operational decals are
located on your unit (see Figure 1-2 be
low).
Keep the decals clean and legible at all
times. Contact your local service dealer or
the factory for replacements if any decals
are damaged or missing.
Refer to the Parts List in this manual for
decal locations, part numbers and ordering
instructions.
Tine Warning
Starting Stabilization
Message (on engine)
Control Description
(on Control Panel)
Figure 1-2: Laeation of Safety and Operating Decais
Operating Symbols
Various ^bds (shown here, with word descripBcns)
hi IH
R
may be used m tttelillerand engine.
CHOKE CHOKE
REVERSE
[\DTC:
Yourunitm^notlwe^oftiesymtx^s.
ON OFF
o—
^
ROTATING TINES
FAST SLOW STOP
TILLER DIRECTION
LEVER DIRECTION
dk
WARNING
TO AVOID SERIOUS INJURY:
- READ THE OPERATOR’S MANUAL.
- KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.
- KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.
- NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.
- SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UN
CLOGGING TINES OR MAKING REPAIRS.
- KEEP BYSTANDERS AWAY FROM MACHINE.
- KEEP AWAY FROM ROTATING PARTS.
- USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS
YOU.