NordicTrack NTTL17900 - Manual (Page 24)

THE INFORMATION MODE/DEMO MODE THE OPTIONAL CHEST PULSE SENSOR
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the main display will
show the following information:
This section of the main
display will show the total
number of miles that the
walking belt has moved.
□ DISTANCE □
C 1
U 1
□ LAPS □
An optional chest pulse sensor adds even more
features to the console. The chest pulse sensor provides
hands-free operation and continuously monitors your
heart rate during your workouts. To purchase the
optional chest pulse sensor, call toll-free 1-888­
825-2588.
This section of the main
display will show the total
number of hours that the
treadmill has been used.
An “E” for English miles or
an “M” for metric kilometers
will appear on the right side
of the main display. Press
the Speed + button to
change the unit of measure­
ment.
I LJ
I t_l
□ SEGMENT TIME
THE OPTIONAL IFIT.COM MODULE
By adding an optional
iFIT.com module to the
treadmill, you can use vir­
tually endless features
from our internet site.
Imagine on-line competi­
tions, personal training
sessions via the internet,
and the ability to use your computer to track your work­
outs. For information about purchasing the optional
IFIT.com module, call toll-free 1-800-735-0768.
□ CALORIES
Tl
JLI
□ HEART RATE ^
IMPORTANT; Make sure
that there is not a letter
“D” in the main display. If
a “D” appears in the display,
the console is in the “demo”
mode. This mode is intended
to be used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the displays and indicators on the console
will automatically light in a preset sequence, although
the buttons on the console will not operate. If a “D” ap­
pears in the display when the information mode is
selected, press the Speed - button so the display is
blank.
To exit the information mode, remove the key from the
console.
24