MTD 24677L - Manual (Page 6)

BELLEVILLE
WASHER (G)-
HAND
KNOB (F)
P DUCT
EMBLY (P)
• Ï. t * 4 - *-
■cr-Si'A-Ui
Place air duct assembly (P) over opening on top
of housing. Secure with two hand knobs (F) and
belleville washer (G). See figure 7.
FIGURE?.
ELASTIC
OPENING
TOP STRAP
ON BAG
/
'STUD P N
ON HAIIDLE
SMALL STRAP
X
BAG (M)
5. Assemble the bag by slipping the top straps oh
bag (M) over upper handle. Hook two small straps
over stud pins on handle. Slip elastic opening o|„
bag over air duct assembly. See figure 8.
NOTE
Be certain elastic on bag is placed over
the flanges on air duct assembly.
FIGURES.
HAIR PIN
COTTER (B)
CLUTCH C RIP
ASSEMBL ' (A)
■CLEVIS PIN Cl
6 .
NOTE
Steps 6, 7 and 8 are for self-propelled
units only.
Assemble the clutch grip (A) to the left hand
side of upper handle. Secure in place with clevis
pin (C) and hair pin cotter (B). See figure 9. Head
of clevis pin should be to the outside of handle. ^