How to fold and move the treadmill – NordicTrack 831.2988 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Fold and Move the Treadmill
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the
lowest position. Next, unplug the power cord. Caution:
You must be able to safely lift 45 pounds (20 kg) in order
to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right.
To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your iegs rather
than your back.
Raise the treadmill halfway to the vertical
position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Raise the treadmill until the frame passes
the storage latch.
Make sure that the storage latch is
inserted into the slot in the side of the frame.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the
storage position in temperatures above 85°
Fahrenheit.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the
storage position as described above.
Make sure that the
storage latch is inserted into the slot in the side of the
frame.
1. Hold the handrails of the treadmill as shown. Place one
foot on the base in the indicated location.
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location.
Never
move the treadmill without tipping it back, or the base
pads may come off. To reduce the risk of injury, use
extreme caution whiie moving the treadmill. Do not
attempt to move the treadmill over an uneven surface.
3. Place one foot on the base, and carefully lower the tread
mill until it is resting in the storage position.
13