Carrier Infinity SYSTXCCITC01-A - Manual (Page 55)

49
S
After the control has connected to the network, go to
www.MyInfinityTouch.Carrier.com to register the unit and begin remote
access. This requires the MAC address and serial number of the Infini-
ty ® Touch Wall Control. To find the serial number and MAC address of
the Infinity ® Touch Wall Control, click on Menu, Down Arrow, Wireless
and View MyInfinity Info. This screen will provide the information
needed on the MyInfinity website during registration.
S If you have any issues, please contact your servicing dealer.
S When the connection to the MyInfinity web server has been established,
the status screen will show Connected for both Wi--Fi and the server.
Connected: Not Connected:
A13242
SYSTXCCITW01--A Models (only)
To establish Wi--Fi connectivity to the Infinity Touch Control through the Infinity
System Wireless Access Point (TP--LINKR Device), connect the WAN (BLUE
port) connection of TP--LINK Wireless Access Point to the home’s existing router
LAN port using the provided Ethernet cable. The LAN ports on the back of the
TP--LINK Wireless Access Point should not be used for other devices. The Infinity
(TP--LINK) Wireless Access Point should only be used for connection of the
Infinity Touch Control(s) and is not intended to be used wired or wirelessly with
any other devices.