Instructions heat shield, Silicon door tie, Non-stick spit rod assembly – Ronco 5500 Series Stainless Rotisserie Oven User Manual

Page 8: Very important

Advertising
background image

Showtime

®

Rotisserie

InstructIons

Heat shield

Never operate without

Heat shield in place behind the Heating Element. Insert it from

the top. Discoloration over time is normal. From time to time you can remove it and use
steel wool to remove and clean any grease buildup. It is also dishwasher safe.
non-stick Drip tray and non-stick Grate cover must always be in place when using
the rotisserie.
Dishwasher safe! you can put the Drip Tray, Basket and the Glass Door (if it will fit)
all in your dishwasher. Rinse off any grease first.
Even Easier clean up! you can line the bottom of your Drip Tray with a small sheet
of aluminum foil. Be sure it is flat against the bottom.

silicon Door tie

Pull the Silicon Tie over the Door Handle to
help secure the Door for storage. Never
move it while it is hot or when it is
turned on.

non-stick spit rod Assembly

removable gear wheel fits on the Spit Rods after food (or Basket) is loaded in place.

It is heavy and has sharp gear teeth. When carrying the spit
rod Assembly always tilt this end upward so it won’t fall off.
cArEFuL!
Use cAutIon. Tips are sharp. Please be very careful
with your hands when loading any food onto the Spit Rods.
spit rods are connected with screws to one gear wheel. Place
the removable gear wheel on after the food is loaded.
carving platform keeps the Spit Rod Assembly in place so you can
load food in upright position on a counter top or in a sink.

8

INSTRUCTIONS: Heat Shield / Silicon Door Tie / Non-stick Spit Rod Assembly

VErY IMportAnt:

Always put the Heat shield,

non-stick Drip tray and

Grate cover in place before

operating.

Advertising