Product at a glance – Chauvet COLORstrip User Manual
Page 4
Page 4 of 17
COLORstrip™ User Manual (Rev. 5)
Product at a
Glance
Use on Dimmer
Auto Programs
Outdoor Use
Auto-ranging Power Supply
Sound Activated
Replaceable Fuse
DMX
User Serviceable
Master/Slave
Duty Cycle
Safety Notes
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
•
Always connect the product to a grounded circuit to avoid the risk of electrocution.
•
Always disconnect the product from the power source before cleaning or replacing
the fuse.
•
Avoid direct eye exposure to the light source while the product is on.
•
Make sure the power cord is not crimped or damaged.
•
Never disconnect the product from power cord by pulling or tugging on the cord.
•
If mounting the product overhead, always secure to a fastening device using a
safety cable.
•
Make sure there are no flammable materials close to the product when operating.
•
Do not touch the product’s housing when operating because it may be very hot.
•
Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
•
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
•
Always install the product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
•
Be sure that no ventilation slots on the product’s housing are blocked.
•
Never connect the product to a dimmer.
•
Make sure to replace the fuse with another of the same type and rating.
•
Never carry the product from the power cord or any moving part. Always use the
hanging/mounting brackets.
•
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the
product at higher temperatures.
•
In the event of a serious operating problem, stop using the product immediately.
•
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
•
Keep this User Manual for future consultation. If you sell the product to another
user, be sure that they also receive this document.