Sekonic L-358 - Manual (Page 11)

-7-
4. Basic Operation
1. Setting measuring mode
1. Hold down the Mode set button !0 and turn the Jog wheel
t to select the desired mode. The mode switching sequence
is shown in the chart below:
2. Modes enclosed in dotted lines can only be selected when the respective DIP switch is in
ON position (see page 8).
3. Modes enclosed in lines can only be selected when Optional Radio Transmitter Module is
installed.
Wireless Multiple Flash
Radio Triggering mode
See page 30
Wireless Flash Radio
Triggering mode
See page 30
Wireless Flash Radio
Triggering setting mode
See page 28
Shutter speed priority
mode (Ambient light)
See page 11
Aperture Priority mode
(Ambient light)
See page 12
EV mode (Ambient light)
See page 13
Auto Reset Cordless
Flash mode
See page 17
Dip switch 1
Cord Multiple Flash
(cumulative) mode
See page 19 Dip switch 2
Cordless Multiple Flash
(cumulative) mode
See page 21
Cord Flash mode
See page 15
Dip switch 2
MODE
Dip switch 2
with Radio
transmitter module
with Radio
transmitter module
with Radio
transmitter module