Hardware features, Then, read the section on – NETGEAR N600 Wireless Dual Band Gigabit Router WNDR3700v3 User Manual
Page 6
Advertising
Getting to Know Your Wireless Router
2
To prepare your router for installation:
1.
Carefully remove the protective film from the top of your router.
2.
Set up your N600 wireless gigabit router by aligning the arrow on the base with the arrow on
the back of the case, and sliding the router onto the base.
3.
Place your router in an area suitable for installation (near an AC power outlet and accessible to
the Ethernet cables for your wired computers).
Hardware Features
Before you install and connect your router, take a moment to become familiar with the front and
back panels of the router—especially the LEDs on the front panel.
Figure 1
Reset
Factory
Settings
button
Advertising