Upgrading the firmware, Upgrading the, Firmware – NETGEAR Universal WiFi Internet Adapter WNCE2001 User Manual
Page 15
Chapter 2. Advanced Settings
|
15
Universal WiFi Internet Adapter WNCE2001
CAUTION:
Do not try to go online, turn off the Internet adapter, shut down the
computer, or do anything else to the Internet adapter until it finishes
restarting!
Upgrading the Firmware
Unless you changed the settings in the Firmware Upgrade screen previously, the Internet
adapter is set up to check for new firmware automatically at log in.
If you do not want to use the automatic firmware check, clear the Check for new version
upon login
check box.
To check for firmware and upgrade if it is available:
1.
From the Internet adapter menu at http://www.mywifiext.net, under the Maintenance
heading, select Firmware Upgrade. The following screen displays:
2.
Click Check to see if new firmware is available. If it is, follow the onscreen prompts to
download it onto your computer.
3.
Use the Browse field to locate and select the new firmware.
4.
Click Upload to install the new firmware on your Internet adapter.
CAUTION:
Once you start the firmware upgrade, do not try to go online, turn off the
Internet adapter, shut down the computer, or do anything else to the
Internet adapter until it finishes restarting!