Charging your nüvi, Changing the fuse, Removing the nüvi and mount – Garmin nuvi 800 User Manual

Page 62

Advertising
background image



nüvi 800 Series Owner’s Manual

Appendix

Perchlorate Material

Replaceable coin cell batteries can

contain perchlorate material. Special

handling could apply. See

www.dtsc

.ca.gov/hazardouswaste/perchlorate

.

Charging Your nüvi

Use the vehicle power cable.
Use the USB cable.
Use an optional AC adapter cable.

Changing the Fuse

CaUTiOn: When replacing the fuse,

do not lose any of the small pieces

and make sure they are put back in the

proper place.

If your unit will not charge in your

vehicle, you might need to replace the

fuse located at the tip of the vehicle

adapter.

1. Unscrew the black, round end piece,

and remove it.



2. Remove the fuse (glass and silver

cylinder), and

replace it with a 3 A

fast-blow fuse.

3. Ensure that the

silver tip is placed in

the black end piece.

Screw on the black

end piece.

Removing the nüvi and

Mount

To remove the nüvi from the cradle,

press the button on the bottom of the

cradle up, and tilt the nüvi forward.
To remove the cradle from the mount,

turn the cradle to the right or left. Apply

pressure in that direction until the cradle

snaps off the mount.
To remove the suction cup mount from

the windshield, flip the lever toward you.

Pull the tab on the suction cup toward

you.

End

piece
Silver tip
Fuse

End

piece
Silver tip
Fuse

Advertising
This manual is related to the following products: