Hunter XC - Manual (Page 5)

ENG
2
A – LCD Display
1. Run Times – Allows user to set each valve station run time
from 1 minute to 4 hours.
2. Start Times – Allows 1 to 4 start times to be set in each
program.
3. Station Number – Indicates currently selected station number.
4. Program Designator – Identifies program (A, B, or C) in use.
5. Day of the Week – Identifies day of the week.
6.
Interval Watering – Identifies month when programming
current date.
7. Odd/Even Watering – Identifies if Odd or Even watering has
been selected.
8. Flashing Sprinkler – Indicates that watering is taking place.
9.
System Off – Allows user to discontinue all programs and
watering. Also allows the user to set the programmable "rain
off" which stops watering for a period from 1 to 7 days.
10. Umbrella – Indicates that the rain sensor is active.
11. Seasonal Adjustment – Allows the user to make run time
changes according to the seasons without reprogramming the
controller. Bars on the left allow quick visual reference to the
seasonal adjustment percentage.
12. Rain Drop – Indicates watering will occur on the selected day.
13. Crossed Rain Drop – Indicates the watering will NOT occur
on the selected day.
14. Calendar – Indicates interval watering schedule has been
programmed. Icon also appears when programming the current
day.
B – Wiring Compartment
15. Terminal Strip – Use to attach transformer, sensor, and valve
wires from their source to the controller.
16. Reset Button – Use to reset the controller.
17. Battery Holder – Holds six AA alkaline batteries.
C – Control Buttons
Button – Increases the selected item flashing in the display.
Button – Decreases the selected item flashing in the display.
Button – Returns selected flashing display to previous item.
Button – Advances the selected flashing display to the next item.
Button – Selects program A, B or C for different watering zone
requirements.
18. Sensor Bypass Switch.
D – Dial Settings
Run – Normal dial position for all controller automatic and manual
operation.
Current Time/Day – Allows current day and clock time to be set.
Start Times – Allows 1 to 4 start times to be set in each program.
Run Times – Allows user to set each valve station run time from 1
minute to 4 hours.
Water Days – Allows the user to select interval days to water.
Seasonal Adjustment – Allows user to make run time changes
according to the seasons without reprogramming the controller.
Bars on the left allow quick visual reference to the seasonal
adjustment percentage.
1
Manual-One Station – Allows user to activate a one-time
watering of a single valve.
ALL
Manual-All Stations – Allows user to activate a one-time
watering of all valve stations or a few selected stations.
System Off – Allows user to discontinue all programs and
watering. Also allows the user to set the programmable rain off
which stops watering for a period from 1 to 7 days.
E – External Transformer (Optional)
A plug in transformer can be used to supply AC power to the
controller.